Drinking tap water should be safe, affordable, and taste good. Follow our guide to check your tap water quality and find the best filtration system for you.
The word is out: bottled water can be bad for our wallets, our health, and our environment. If you’re among the growing number of people kicking the bottled water habit and making the move to tap water, you may be curious about your local water supply. Consumer standards are actually more stringent for the quality and safety of tap water than for bottled water.
We need to make tap water safe and affordable for everyone. Sign the petition for safe water for all!
The best way to find out about your local water is to read your water quality report, a document that your water utility is required by federal law to provide to you every year telling you if your water has any contamination. This guide will help you understand how to interpret what your report tells you.
Beyond basic safety, many people prefer to filter their tap water to remove minerals and particulates, which may affect the taste. We’ll walk you through the different types of tap water filters and help you pick the best one for your needs.
Is Your Water Safe? Your Water Quality Report
Annual water quality reports also called consumer confidence reports, are intended to help consumers make informed choices about their drinking water. They let you know what contaminants, if any, are in your drinking water and how these contaminants may affect your health. They list all the regulated toxins that were detected in your water over the preceding calendar year. This guide will help you understand what’s in your water quality report and how to interpret what it tells you.
Who Gets a Water Quality Report?
A water quality report is available for every customer of a community water system, which is one that provides year-round service to more than 15 households or more than 25 people.
When Is a Water Quality Report Issued?
You should receive your report by July 1 of each year.
What Does a Water Quality Report Tell You?
Every water quality report must contain:
- The source of the drinking water, be it a river, lake, groundwater aquifer or some other body of water;
- A brief summary of the state’s source water assessment, which measures how susceptible the source water is to contamination, and how to get a copy of the complete assessment;
- The U.S. Environmental Protection Agency (EPA) regulations and health goals for drinking water contaminants;
- A list of all detected regulated contaminants and their levels;
- Potential health effects of any contaminant detected at a level that violates the EPA’s health standard;
- An educational statement for people with weakened immune systems about cryptosporidium and other microbial contaminants;
- Contact information for the water system and the EPA’s Safe Drinking Water Hotline.
Worried about lead? Make sure you get the right water filter.
The crisis in Flint, Michigan has brought attention to the serious problem of lead in drinking water. Fortunately, a water filter that is either NSF/ANSI Standard 53 or NSF/ANSI Standard 58 certified can reduce lead in your drinking water. These certifications are established by NSF International, a public health organization that develops standards and provides certifications with the mission to improve global human health.
These certified filters come in different shapes and sizes. Certification requires that manufacturers state how much water the filter can treat before it must be changed. Some filters even include a device that will let you know when the filter needs to be changed. When changing filter cartridges, it’s important to use a certified cartridge. A non-certified cartridge may not effectively filter lead from the drinking water.
There are a variety of filter options that meet the NSF’s certified standard. Outlined below, these filters include pour-through pitchers/carafes, faucet mounts, and even plumbed-in filters that are installed under your sink or reverse osmosis drinking water treatment systems.
On the NSF website at www.nsf.org, you can search for specific suppliers and product codes to see if they are NSF certified. Their lead-specific guide provides a list of all NSF Standard certified brands and models with details for each: www.nsf.org/info/leadfiltrationguide.
Why Is a Water Quality Report Important?
Your water utility is required by law to tell you about any violation of EPA water quality standards when it occurs (through the mail or media outlets such as newspapers and television) and again in the annual water quality report. You should not drink water that fails to meet EPA standards because it may be unsafe. Thankfully, public utilities have worked hard to improve water quality. As a result, more than 90 percent of water systems meet all EPA regulations.
The report must also disclose a list of all regulated contaminants that have been detected in the water supply. The Safe Drinking Water Act sets the maximum level of contaminants allowed in drinking water based on the filtering and treatment capabilities of current technology. The water quality report also tells you about potentially harmful substances found in your water at levels below their legal limit.
How Is a Water Quality Report Distributed?
All very large community water systems, serving more than 100,000 people, must post the report online. All community water systems that serve more than 10,000 people must mail or email either the report or its web address to customers.
Water systems also must make a “good faith effort” to reach renters, workers, and other consumers who use the water but do not receive water bills. Utilities should use a combination of different outreach methods to notify users, such as posting the reports online, mailing them, and advertising in local newspapers.
Tap Water Filters and Filtration Systems
The United States provides some of the cleanest drinking water in the world, and more than 90 percent of water systems meet all EPA regulations. Some people may prefer to filter their tap water, however, because they prefer the taste, want to remove minerals and particulates, or have concerns about lead piping and plumbing. This section highlights the types of available filters to help you to determine which one is best for your needs.
What to Consider When Buying a Water Filter
What impurities do you want to remove from your water? Are you concerned about health risks, or simply unappetizing tastes and odors? Different filters are designed to remove various impurities, so be sure that the filter you buy will do the job.
Once you have read your water quality report, determine what, if anything, you would like to filter out of your water. Depending on the water quality where you live, you may decide that you do not need to filter your water at all.
Water Filtration: What Are Your Options?
Water filters come in many shapes and sizes. Depending on your filtration needs, lifestyle preferences, and budget, you may want to consider the following options, whose descriptions were adapted from a May 2010 Consumer Reports article:
- Carafe, or “pour-through,” filters are the simplest water filters to use. The filter fits inside a pitcher that you can keep in your refrigerator. Carafes are inexpensive and easy to use. However, the filters have a short lifetime and can only filter a limited amount of water at a time.
- A faucet-mounted filter is exactly what it sounds like — a filter that is screwed directly on to your faucet. These filters require minimal installation, but they slow the flow of water and can’t be used on all faucets.
- Countertop filters are best for filtering large quantities of water without modifying plumbing. They’re less likely to clog than carafe or faucet-mounted filters, but can clutter countertops and can’t be used with all types of faucets.
- Plumbed-in filters are installed directly into an existing water pipe. Often, they are installed under the sink (and are sometimes referred to as “under-sink” filters). They can be plumbed-in to the existing sink faucet, which may require drilling a hole in the countertop, or they can dispense water through a separate tap. These filters are best for filtering large amounts of water without modifying the existing faucet or cluttering the counter. However, they take up cabinet space and require plumbing modifications.
- Point-of-entry, or “whole-house,” filters are installed directly in the water main and filter all the water in a house, including water for the kitchen, laundry room and bathrooms. These filters have a long lifetime and are an inexpensive way to remove sediment, rust and, in some cases, chlorine from household water. But most won’t remove most other contaminants. They also require professional installation.
Water Filter Technologies
Different water filter products use different technologies. Some use more than one. If you are looking for a home water filter, you are likely to come across some of these terms:
- Particulate/mechanical filter: These are simple screens that block large particles. They often function as “prefilters” in a multiple-step water filter.
- Adsorption/Activated Carbon: Adsorption refers to a physical process where particles in water are removed because they stick to the surface of the material in the filter. These filters are usually made with carbon, often in granulated or powdered form. They are the most common filters on the market and come in different forms including pitchers and faucet-mounted systems. They are generally effective for reducing the most typical worrisome compounds that can be found in municipal water: chlorine, chlorine byproducts and dissolved volatile organic chemicals (VOCs) such as pesticides and herbicides. Carbon adsorption filters generally work well for reducing bad odors and tastes.
- Softeners/Ion Exchange Units: Water softeners use a process called ion exchange to reduce hard metals — including lead — in water. When water passes through an ion exchange unit, hard metal ions are replaced by sodium ions, leaving the water “softer” as a result — but also saltier. This technology is often used in combination with adsorptive or reverse-osmosis filters. Potassium chloride water softeners work in a similar way to sodium chloride softeners, but without increasing levels of salt in the water; this makes potassium chloride softeners a better choice for some uses, such as watering plants.
- Ultraviolet (UV) Treatment: This treatment uses UV light to kill germs that may be present in the water. UV treatment is the only treatment certified by the National Sanitation Foundation International to reduce bacteria.
- Reverse Osmosis: Reverse osmosis is a process where water is forced through a membrane that filters out molecules physically larger than the water molecules. Although reverse osmosis works well for reducing minerals, it is not effective for chlorine or volatile organic compounds (VOCs), which are more likely to be concerns in municipal tap water. However, many reverse-osmosis units are combined with pre-filters and carbon filters to address this concern. Reverse-osmosis filters are expensive and very inefficient — they waste from one to three gallons of water for every gallon that they filter.
- Distillation: Water distillers heat water so that it turns into steam, which is then collected and returned to its liquid form. Contaminants are left behind when the water evaporates. Thus, distillation is very effective for removing most minerals and bacteria. However, some distillation units do not remove VOCs. Distillation also requires more energy than other methods, to heat the water.
Consider Which Filter Is Best for You
Each product has its own pros and cons. Individual products may use multiple technologies and are often marketed as two (or more) stage filters. Carafe, faucet-mounted, and countertop filters typically use a combination of adsorption and ion exchange resins, while plumbed-in systems may use those technologies in addition to reverse osmosis.
Filters also come in a wide range of prices. Most carafes and faucet-mounted filters cost between $20 and $50, while countertop, under-sink, and whole-house filters can range from $50 to $900.
When considering the price of a water filter, remember that the total cost includes your initial purchase price as well as any installation, maintenance, or replacement fees. Filter parts need to be changed periodically to prevent clogging, so be sure to consider how much replacement parts cost, as well as the manufacturer’s estimated life span for the product.
Also, consider the amount of water you use. Some filter types have larger water capacities than others. Carafes, for example, can filter a few cups or gallons at a time, while faucet-mounted or under-sink filters work directly through a tap.
Most importantly, make sure that the individual product reduces the specific contaminants that you want to remove from your water. Generally, products will include claims on their packaging or advertising regarding which contaminants they reduce and the percentage reduction rate. See the table below for more information about common contaminants of concern and which type of filter will reduce the contaminants.
Water Quality Concerns and Filtration Methods*
|Contaminant/Quality Concern||Filtration Method||Notes|
|Chlorine||Carbon/Charcoal Filter||Contact your local water utility to find out which disinfectant is used in your drinking water. Water filters certified to reduce chlorine do not necessarily work for chloramine.|
|Chlorine Byproducts (Trihalomethanes)||Carbon/Charcoal Filter||Trihalomethanes are a type of VOC (volatile organic compound), so products certified to reduce VOCs will reduce this contaminant.|
|Taste and Odor||Carbon/Charcoal Filter|
|Lead||Carbon, Distillation, Reverse Osmosis|
|Fluoride||Distillation, Reverse Osmosis||Not all public drinking water systems add fluoride to the water. Check to see if your community does by reading your annual water quality report.|
|Chloramines||Some Carbon/Charcoal Filters||Check that the system you select is certified to reduce chloramines. Systems that reduce chlorine do not necessarily reduce chloramines.|
|Arsenic||Distillation, Reverse Osmosis||Two different forms of arsenic can be found in water, so it is important to know which type of arsenic you want to filter before choosing a water treatment system.|
*Information taken from National Sanitation Foundation’s Contaminant Guide. Please note that filters and treatment systems should be certified by a third party agency. Check to ensure that the brand of filter you choose is certified to address your water quality needs.
Pharmaceuticals, Personal Care Products and Hormone-Disrupting Chemicals
Consumers are increasingly concerned about pharmaceutical residues and other hormone-disrupting chemicals in drinking water. These chemicals are not regulated, but studies have shown that they are showing up in trace amounts in drinking water. According to the National Sanitation Foundation, there is no testing available at this time to measure the potential ability of home water treatment systems to reduce pharmaceuticals.
Verify the Quality of Your Filter
Make sure that your filter is certified by an independent certifying agency. Not all filters live up to the claims on the package, so make sure that the product you are buying does.